Filter
Top Products
3 Touch [Call] to make a call.
To cancel the call after the system starts dial-
ing, touch
.
4 Touch
to end the call.
Receiving a phone call
You can perform hands-free answering by
using the navigation system.
Answering an incoming call
The system informs you that it is receiving a
call by displaying a message and producing a
ring sound once.
If [Auto Answer Preference] is set to [Off],
answer the call manually. Answering is avail-
able if any screen is displayed, such as the
map screen or the setting screen.
p You can set this navigation system to auto-
matically answer incoming calls.
= For details, refer to Answering a call
automatically on page 88.
1 When a call comes in, the answering
operation menu appears on the screen.
p The registered name appears if the phone
number of the received call is already regis-
tered in “Contacts”.
p Depending on the caller ID service, the
phone number of the received call may not
be displayed. “Unknown” appears instead.
2 To answer an incoming call, touch
.
The operation menu during a call appears.
# Touch [Vol –]or[Vol +].
You can adjust volume when you are talking.
# Touch
to reject an incoming call.
# Ifyou touch [Close Menu], the menu is closed
and
appears.
Todisplay the menu again, touch .
3 Touch to end the call.
The call ends.
p If the voice on the other end of the call is
too quiet to hear, you can adjust the volume
of the received voice.
= For more details about “Volume”, refer
to Setting the Volume for Guidance and
Phone on page 98.
p You may hear a noise when you hang up
the phone.
Rejecting an incoming call
You can reject an incoming call.
= For details, refer to Setting the automatic re-
jection function on page 89.
% When a call comes in, touch
.
The call is rejected.
p The rejected call is recorded in the missed
call history list.
= For details, refer to Making a phone call
using missed call history on page 84.
Using hands-free phoning
En
86
Chapter
12