Pioneer AVIC-Z110BT GPS Receiver User Manual


 
Selecting the color from the preset
colors
1 Display the Illumination Color screen.
2 Touch the color you want.
Available options;
! Coloredkeys Selects the desired preset
color
! Memory1/Memory 2/Memory 3 Col-
ors registered in the memory
= For details, refer to Creating a user-de-
fined color and storing it to memory on
this page.
! ScanShifts between the eight default
colors in sequence gradually.
Creating a user-defined color and
storing it to memory
You can create a user-defined color and set it
as the illumination color.
1 Display the Illumination Color screen.
2 Touch [Custom].
The Illumination Color screen appears.
p If [Scan] is set, [Custom] cannot be se-
lected.
3 Touch [+] or [] to adjust the values for
Red, Green and Blue to create a favorite
color.
Watch the illumination of hardware keys while
adjusting the color.
Each time you touch [+]or[] increases or de-
creases the value of the selected item. +31 to
+00 is displayed as the value is increased or
decreased.
p An entry cannot be storedwith all of the va-
lues set to +00.
4 Touch [Memory 1], [Memory 2] or
[Memory 3] to store the illumination color.
5 Touch [OK] to return to the previous
screen.
Checking the version information
1 Display the System Settings screen.
2 Touch [Service Information].
The Service Information Screenscreen ap-
pears.
3 Check the version information.
Replicating the settings
You can import settings you have made on the
utility program AVIC FEEDS which is avail-
able separately to the navigation system.
1 Insert an SD memory card into the SD
card slot.
= For more details of the operation, refer to In-
serting and ejecting an SD memory card on
page 29.
2 Press the HOME button to display the
Top Menu.
3 Touch [Settings].
The Settings Menuscreen appears.
4 Touch [Setting Replicator].
A message confirming whether to update the
settings appears.
Customizing preferences
En
101
Chapter
13
Customizing preferences