Filter
Top Products
You can listen to the radio by using the naviga-
tion system. This section describes operations
for radio (FM).
% Touch [FM] on the “AV Source” menu to
display the “FM” screen.
= For details concerning operations, refer to
Screen switching overview on page 34.
Reading the screen
1 2 43
6
5
7
8
9
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the radio is tuned to: FM1
to FM3.
3 Signal level indicator
4 Preset number indicator
Shows what preset item has been selected.
5 Frequency indicator
6 Current time
7 Program service name indicator
Shows the program service name (station
name) of the current station.
8 LOCAL indicator
Shows when local seek tuning is on.
9 STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
Using the touch panel keys
2
3
4
1
1 Display the “Function” menu
= For details, refer to Using the
“Function” menu on the next page.
2 Select a preset channel
[c]or[d] can be used to switchpreset chan-
nels.
3 Perform manual tuning
Totune manually, touch [c]or[d] briefly. The
frequencies move up or down one step at a
time.
Perform seek tuning
Toperform seek tuning, touch and hold [c]or
[d] for about one second and release. The
tuner will scan the frequencies until a broad-
cast strong enough for good reception is
found.
p You can cancel seek tuning by touching
either [c]or[d] briefly.
p If you touch and hold [c]or[d], you
can skip broadcasting frequencies.
Seek tuning will start as soon as you re-
lease the keys.
p You can also perform these operations
by using the TRK (c/d) button.
4 Select an FM band
Touch[Band] repeatedly until the desired FM
band is displayed, FM1, FM2 or FM3.
p This function is convenient for preparing
different preset lists for each band.
Using the radio (FM)
En
103
Chapter
14
Using the radio (FM)