Filter
Top Products
(Continued)
0
Rotate tires. See “Tire Inspection and Rotation’’ in the Index for proper
rotation pattern and additional information.
See
“Tires” in the Index.
0
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.
**
DATE SERVICED
BY:
ACTUAL
MILEAGE
I
I
30,000
Miles
(48
000
km)
17
Change engine oil and filter (or every
3
months, whichever occurs
17
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is
10”
F
(-12”
C),
or higher. When weather is cold,
let
the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each
of
the listed lubrication service items at this mileage
interval (or every
12
months, whichever occurs first).
first).
An
Emission
Control
Service.
0
Drain, flush and refill the cooling system with new coolant (or every
24
months, whichever occurs first). See “Engine Coolant” in the Index for
what to
use.
An
Emission
Control
Service.
Also inspect the hoses and replace them
if
they are cracked, swollen or
deteriorated. Tighten all
hose
clamps (except constant tension clamps).
Remove debris and clean the outside
of
the radiator and air
conditioning condenser. Wash the radiator neck.
To
ensure proper
operation, pressure test the radiator and cap.
(Continued)
7-84