Filter
Top Products
Maintenance Schedule II
-
Gasoline Engines With
Light
Duty
Emissions
~
~~~
~~
37,500
Miles
(62
500
km)
0
Change engine oil and filter (or every
12
months, whichever occurs
first).
An
Emission Control Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should
not
be lubricated unless their temperature is
10"
F
(-12"
C), or higher. When weather is cold, let the ball joints and king
pin
bushings warm
up
before lubrication or they could be damaged.
Perform each
of
the listed lubrication service items at this mileage
interval (or every
12
months, whichever occurs first).
0
Check rear/front axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.;'::':
0
Rotate tires. See "Tire Inspection and Rotation"
in
the Index for proper
rotation pattern and additional information.
DATE
SERVICED
BY:
ACTUAL
MILEAGE
:
45,000
Miles
(75
000
km)
0
Change engine
oil
and filter (or every
12
months, whichever occurs
first).
An
Emission Control Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should
not
be lubricated unless their temperature is
IO"
F
(-12"
C),
or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval (or every
12
months,
whichever occurs first).
(Continued)