Filter
Top Products
Maintenance Schedule
II
-
Gasoline Engines With
Light
Duty
Emissions
(Continued)
0
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.*#'
0
For 2-Wheel Drive vehicles
only:
Clean and repack the front wheel
bearings (or at each brake relining, whichever occurs first).
DATE
SERVICED
BY:
ACTUAL MILEAGE
22,500
Miles
(37
500
km)
0
Change engine
oil
and filter (or every
12
months,
whichever occurs
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is
10"
F
(-12"
C),
or
higher. When weather
is
cold, let the
ball
joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each
of
the listed lubrication service items at this mileage
interval (or every
12
months; whichever occurs first).
first).
An
Emission
Control
Service.
0
Check readfront axle fluid
level
and add fluid as needed. Check
constant velocity joints and axle seals for leaking.*#:
0
Rotate tires. See "Tire Inspection and Rotation"
in
the Index for proper
rotation pattern and additional information.
I
DATE
I
ACTUALMILEAGE
I
SERVICED
BY:
I