Filter
Top Products
I
Maintenance Schedule
I
-
Diesel Engines
I
(Continued)
0
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.
**
47,500
Miles
(76
000
km)
0
Change engine oil and filter (or every
3
months, whichever occurs
first).
An
Emission
Control
Service.
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature
is
10"
F
(-12"
C),
or higher. When weather
is
cold, let the ball joints and king
pin bushings warm up before lubrication or
they
could
be
damaged.
Perform each
of
the listed lubrication service items at this mileage
interval (or every
12
months, whichever occurs first).
DATE
SERVICED
BY:
ACTUAL
MILEAGE
7-74