Filter
Top Products
Maintenance Schedule
I
-
Gasoline Engines With
Light Duty Emissions
(Continued)
0
Rotate tires. See "Tire Inspection and Rotation'' in the Index for proper
0
Check readfront axle fluid level and add fluid as needed. Check
rotation pattern and additional information.
constant velocity joints and axle seals for leaking.""
DATE SERVICED
BY:
ACTUAL MILEAGE
39,000
Miles
(65
000
km)
0
Change engine
oil
and filter (or every
3
months, whichever occurs
first).
An
Emission
Control
Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides,
rear
driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should
not
be lubricated unless their temperature is
10"
F
(-1
2"
C), or higher. When weather is cold,
let
the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval (or every
6
months, whichever occurs first).
0
Check readfront axle fluid
level
and add fluid as needed. Check
constant velocity joints and axle seals
for
leaking.**
DATE
SERVICED
BY:
ACTUAL MILEAGE
7-2
3