Filter
Top Products
1
Maintenance Schedule
II
-
Diesel Engines
I
15,000
Miles
(24
000
km)
0
Change engine oil and filter (or every
3
months, whichever occurs
first).
An
Emission Control Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature
is
10”
F
(-12”
C),
or higher. When weather
is
cold, let
the
ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval
(or
every 12 months, whichever occurs first).
0
Rotate tires. See “Tire Inspection and Rotation”
in
the Index for proper
rotation pattern and additional information. See “Tires”
in
the Index.
0
Check readfront axle fluid level and add fluid
ai
needed. Check
constant velocity joints and axle seals for leaking.
**
DATE
SERVICED
BY:
ACTUAL MILEAGE
I
20,000
Milles
(32
000
km)
0
Change engine oil and filter (or every
3
months, whichever occurs
first).
An
Emission
Control
Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is
10”
F
(-12”
C),
or higher. When weather is cold, let the ball joints and king
pin bushings warm
up
before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval (or every 12 months, whichever occurs first).
(Continued)
7-82