Filter
Top Products
If the disc player is very hot, or if you’re driving on
a
very rough road, a
disc may come
out
or just not play. If you see the word Err
on
the display,
the disc player is too hot
to
play the disc. Press RECALL to make the word
Err
go
off
the display.
When things get back to normal, the disc should play again. If the disc
comes back out, check whether:
The disc
is
upside down.
It
is
dirty, scratched, or wet.
Too
much moisture is in the air.
(If
there
IS,
wait about one hour and try
again.)
RECALL
-
Press RECALL to see what track is playing. Press it again
within
5
seconds to see how long
the
CD has been playing that track.
Elapsed time is displayed
in
minutes and tenths
of
a second. The track
number will
also
appear when a new track begins
to
play. Press RECALL
again to return to the time display.
COMP
-
Press the COMP button
to
make
soft
and loud passages more
nearly equal in volume. “COMP’ will appear
in
the display while using this
control.
PREV
(1)
-
Press PREV or
4
SEEK
to
search for the previous selection,
If you hold this button or press
it
more than once, the disc will advance
further. PREV will appear
in
the display.
RDM
(2)
-
Press RDM
to
play
the
tracks
on
the
disc
in
random (instead of
1,2,
3
...)
order. While
in
the RDM mode, RANDOM appears in the display.
Press RDM again to return to normal play.
NEXT
(3)
-
Press NEXT or SEEK
to
search for the
next
selection. If
you
hold this button or press
it
more than once, the disc will advance
further. NEXT will appear
in
the display.
REV
(4)-
Press and hold REV to return rapidly
to
a favorite passage. You
will hear the disc selection play at high speed while you press the REV
button. This allows you to listen and find out when the disc is at the desired
selection passage. Release REV to resume playing.
00
(5)-
Press
00
to
reduce tape
noise
fa
remote cassette player
is
used.
The
00
symbol will appear in the display while the player is in this
mode.
FWD
(6)-
Press and hold FWD to advance rapidly within a track. You will
hear the disc selection play at high speed while you press the FWD button.
This allows
you
to listen and find
out
when the disc
is
at
the
desired
selection passage. Release FWD
to
resume playing.
CD
AUX
-
To switch between the player and the radio when a disc
is
playing, press the AMFM button. To return
to
the player, press
CD
AUX.
3-22