Filter
Top Products
I
Maintenance Schedule
I
-
Diesel Engines
I7
Inspect accessory drive (serpentine) belt for cracks, fraying and wear
and check belt for proper tension. Adjust or replace belt as needed.
An
Emission Control Service.
0
Inspect shields and underhood insulation for damage or looseness.
Adjust or replace as required.
This
is
a Noise Emission Control
Service. Applicable only to vehicles sold in the United States.
0
Check the air intake system installation to assure that gaskets are
properly sealed and
that
all hose connections, fasteners and other
components are tight. Also check to be sure that
the
air cleaner housing
is properly seated, the cover
fits
tightly and the wing
nuts
are tight.
Tighten connections and fasteners or replace damaged parts as
necessary.
This is a Noise Emission Control Service. Applicable only
to vehicles sold in the United States.
[J
If
your engine has
a
thermostatically controlled cooling fan, inspect all
hoses
and
ducts for proper hook-up (or every
12
months, whichever
occurs first). Be sure the valve works properly.
This
is
a Noise
Emission Control Service. Applicable only
to
vehicles sold in the
United States.
0
Check the exhaust pressure regulator valve for proper operation;
correct any binding. Inspect hoses for cracks, chafing or decay. Replace
parts as needed.
An
Emission Control Service.
0
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.
**
7-79