Filter
Top Products
Maintenance Schedule
I
-
Gasoline Engines With
Light Duty Emissions
(Continued)
0
Check readfront axle tluid level and add fluid
as
needed. Check
constant
velocity
joints and axle seals for leaking.
**
0
Rotate tires. See “Tire Inspection and Rotation’’
in
the Index for proper
rotation pattern and additional information.
DATE
SERVICED
BY:
ACTUAL MILEAGE
9,000
Miles
(15
000
km)
0
Change engine oil and filter (or every
3
months, whichever occurs
first).
An
Emission Control Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs.
Ball
joints and king pin
bushings should
not
be lubricated unless their temperature
is
IO”
F
(-1
2”
C),
or higher. When weather is cold, let
the
ball joints and king
pin bushings warm
up
before lubrication or they could be damaged.
Perform each
of
the listed lubrication service items at this mileage
interval (or every
6
months, whichever occurs first).
0
Check readfront axle fluid level and add tluid
as
needed. Check
constant velocity joints and axle seals for leaking.
**
DATE
SERVICED
BY:
ACTUAL MILEAGE
a
7-1
4
~~