Filter
Top Products
Maintenance Schedule
I
-
Gasoline Engines Heavy
Duty Emissions
(Continued)
0
Adjust timing to underhood label specifications. Inspect the inside and
outside of the distributor cap and rotor for cracks, carbon tracking and
corrosion. Clean or replace as needed.
An Emission Control Service.
This
is
a Noise Emission Control Service.
0
If your vehicle has a thermostatically controlled air cleaner, inspect all
hoses
and ducts for proper hook-up. Be sure
the
valve works properly.
An Emission Control Service.
This is a Noise Emission Control
Service.
Inspect accessory drive (serpentine) belt for cracks, fraying and wear
and check belt for proper tension. Adjust or replace belt as needed.
An
Emission Control Service.
0
Inspect shields and underhood insulation for damage
or
looseness.
Adjust or replace
as
required.
This is a Noise Emission Control
Service. Applicable only to vehicles sold in the United States.
0
Check the air intake system installation to assure that gaskets are
properly sealed and that all hose connections, fasteners and other
components are tight. Also check to be sure that the air cleaner housing
is
properly seated, the cover fits tightly and the wing nuts are tight.
Tighten connections and fasteners or replace damaged parts as
necessary.
This is
a
Noise Emission Control Service. Applicable only
to vehicles sold in the United States.
0
If your engine has a thermostatically controlled cooling fan, inspect all
hoses and ducts for proper hook-up (or every
12
months, whichever
occurs first). Be sure the valve works properly.
This is a Noise
Emission Control Service. Applicable only to vehicles sold in the
United States.
DATE
SERVICED
BY:
ACTUAL
MILEAGE
I