Filter
Top Products
I
Maintenance Schedule
I
-
Diesel Engines
I
7,500
Miles
(12
000
km)
0
Change engine
oil
and filter (or
every
3
months, whichever occurs
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should
not
be lubricated unless their temperature
is
10”
F
(-I
2”
C), or higher. When weather is cold,
let
the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items
at
this mileage
interval (or every
12
months, whichever occurs first).
17
Rotate tires. See “Tire Inspection and Rotation”
in
the Index for proper
rotation pattern and additional information. See “Tires” in
the
Index.
first).
An Emission
Control
Service.
DATE
SERVICED
BY:
ACTUAL MILEAGE
10,000
Miles
(16
000
km)
17
Change engine oil and filter (or every
3
months, whichever occurs
first).
An
Emission
Control
Service.
0
Lubricate
the
front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should
not
be lubricated unless their temperature is
10”
F
(-12”
C),
or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each
of
the
listed lubrication service items at this mileage
interval
(or
every
12
months, whichever occurs first).
0
Inspect shields and underhood insulation for damage or looseness.
Adjust or replace
as
required.
This
is
a Noise Emission Control
Service. Applicable only
to
vehicles sold in the United States.
(Continued)
7-63
-
--