Filter
Top Products
To
fold the seat, pull
on
the
release handle
at the bottom of
the
seat cushion marked
RELEASE.
When
you
release the
seat cushion, the
seatback is
automatically
released. Pull the loop
on the seatback
forward and fold the
seatback into the seat
cushion.
While the seat is in the folded position, hang the latch plate end of the outer
passenger position safety belts on the hooks at the top
of
each retractor
cover, out of
the
way.
To
return the seat to the passenger position, lift
the
seatback
up
with both
hands and push
it
rearward
until
it
latches.
After returning the seat to the passenger position, pull forward
on
the
seatback to make sure
it
is locked in place. Also, return the safety belts and
head restraints
to
their original positions,
so
they will be available for rear
seat passengers
to
use. Then, fold
the
head restraint stowage bag closed and
attach it
to
the rear seatback, behind the
load
floor flipper panel.
1-9