Filter
Top Products
I
Maintenance Schedule
II
-
Gasoline Engines With
Heavy
Duty
Emissions
12,000 Miles
(20
000
km)
Change engine
oil
and filter (or every 12 months, whichever occurs
first).
An Emission Control
Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and
clutch
pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is
10"
F
(-12"
C), or higher. When weather is cold, let
the
ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform
each
of the listed lubrication service items
at
this mileage
interval (or every 12 months, whichever occurs first).
constant velocity joints and axle seals for leaking.**
0
Check readfront axle fluid level and add fluid as needed. Check
DATE
SERVICED
BY:
ACTUAL MILEAGE
18,000 Miles
(30
000
km)
0
Change engine oil and filter (or every 12 months, whichever occurs
first).
An Emission Control Service.
1
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is
10"
F
(-12" C), or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each
of
the listed lubrication service items at this mileage
interval (or every 12 months, whichever occurs first).
0
Check readfront axle fluid level and add fluid
as
needed. Check
constant velocity joints and axle seals for leaking."'"
(Continued)
7-54