Filter
Top Products
Folding Second Seat (Suburban)
If your vehicle has
a
60/40
second seat, either side may be folded down to
give you more cargo space. Before folding, push the buckle portion of the
safety belt down into the seat cushion pockets, out of the way. Also, make
sure that nothing is under
or
in front of the seat. When the seat is folded, it
will lay flat
on
the floor.
First, remove the head
restraints. Push the
release buttons at the
bottom of each head
restraint height adjust
post and slide the head
restraint out of the
height adjust tubes.
Set the head restraints aside for now. You will stow them in their proper
position after you are done folding the seat.
To
fold the seat, pull
up on the strap loop at
the
rear outer edge of
the seat cushion.
Then, pull the seat
cushion up and fold it
forward.
After folding the seat cushion fully forward, push down on the lever at the
side
of
the seatback and fold the seatback forward until it
is
flat.
1-13