Filter
Top Products
Maintenance Schedule
II
-
Gasoline Engines With
Heavy
Duty Emissions
54,000
Miles
(90
000
km)
0
0
0
0
0
Change engine oil and filter (or every 12 months, whichever occurs
first).
An
Emission Control Service.
Lubricate the front suspension, king
pin
bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is
10"
F
(-12"
C),
or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of
the
listed lubrication service items at this mileage
interval (or every 12 months, whichever occurs first).
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.""
Replace spark plugs.
An
Emission Control Service.
Rotate tires. See "Tire Inspection and Rotation"
in
the Index for proper
rotation pattern and additional information.
DATE
SERVICED
BY:
ACTUAL
MILEAGE
60,000
Miles
(100
000
km)
0
Change engine
oil
and filter
(or
every 12
months,
whichever occurs
first).
An
Emission Control Service.
0
Lubricate the front suspension, king
pin
bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs.
Ball
joints and king pin
bushings should
not
be lubricated unless their temperature
is
10"
F
(-12"
C),
or higher. When weather is cold,
let
the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each
of
the
listed lubrication service items at this mileage
interval (or every
12
months, whichever occurs first).
(Continued)
7-60