Filter
Top Products
I
Maintenance Schedule
I
-
Diesel Engines
I
(Continued)
0
0
0
Check the air intake system installation to assure that gaskets are
properly sealed and that all hose connections, fasteners and other
components are tight.
Also
check to be sure that
the
air cleaner housing
is properly seated, the cover fits tightly and the wing nuts are tight.
Tighten connections and fasteners or replace damaged parts
as
necessary.
This is a Noise Emission Control Service. Applicable only
to vehicles
sold
in the United States.
If
your engine has
a
thermostatically controlled cooling fan, inspect all
hoses and ducts for proper hook-up
(or
every 12 months, whichever
occurs first).
Be
sure the valve works properly.
This
is
a Noise
Emission Control Service. Applicable only to vehicles
sold
in the
United States.
Check readfront axle fluid level and add fluid
as
needed. Check
constant velocity joints and axle seals for leaking.
l::i:
DATE SERVICED
BY:
ACTUAL MILEAGE
L
12,500
Miles
(20
000
km)
CI
0
Change engine
oil
and filter (or every
3
months, whichever occurs
first).
An Emission Control Service.
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs.
Ball
joints and king pin
bushings should not be lubricated unless their temperature is
10"
F
(-12" C), or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication
or
they
could be damaged.
Perform each of
the
listed lubrication service items at this mileage
interval (or every
12
months, whichever occurs first).
I
DATE
I
ACTUALMILEAGE
I
SERVICED
BY:
I
7-64