Filter
Top Products
Jack and Jacking Tool Storage
-
&Door
Utility
Model
To
open the jack cover on 4-dOOr utility models, push the cover latches
down and remove the cover.
To take the jack out, turn the wing-head bolt counterclockwise and take it and the
retainer
off.
Take the jack and storage
box
out and take the tools out
of
the box.
Your vehicle may have a pair of emergency gloves secured to the jack. You
can use them when changing the tire, or during other emergency situations.
Remember
to
replace them with the jack,
so
you will have them handy if
needed later.
Jack and Jacking Tool Storage
-
Suburban
If
your Suburban has a jack cover, lift the tab up to release the cover, then
take it
off.
To
take the jack out, turn the wing nut counterclockwise and take it and the
retainer
off.
Take the jack and storage box out and take the tools out
of
the box.
Your vehicle may have a pair
of
emergency gloves secured to the jack. You
can use them when changing the tire, or during other emergency situations.
Remember to replace them with the jack,
so
you will have them handy if
needed later.
5-27