Filter
Top Products
Maintenance Schedule
I
-
Gasoline Engines Heavy
Duty Emissions
(Continued)
Uses
such
as
found
in
taxi, police or delivery service.
If
you
do not use your vehicle under
any
of
these conditions, the.fZuid
andfilter do
not
require changing.
0
Manual transmission fluid doesn't require change.
Lubricate transmission shift linkage, parking brake cable guides and
underbody contact points (or every
6
months, whichever occurs first).
DATE
I
ACTUALMILEAGE
I
SERVICED
BY:
51,000
Miles
(85
000
km)
0
Change engine oil and filter (or every
3
months, whichever occurs
17
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is
10"
F
(-1
2"
C),
or higher. When weather is cold,
let
the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each
of
the listed lubrication service items at
this
mileage
interval (or every
12
months, whichever occurs first).
first).
An
Emission Control Service.
0
Check readfront axle fluid level and add fluid
as
needed. Check
constant velocity joints and axle seals for leaking.*'k
DATE
SERVICED
BY:
ACTUAL MILEAGE
7-49