Filter
Top Products
Turn Signal and Lane Change lndicator
To
signal a turn, move the lever all the way up or down. When the turn is
finished, the lever will return automatically.
6
A
green arrow on the
instrument panel will
flash in the direction
of the turn or lane
change.
To
signal a lane change, just raise or lower the lever until the green arrow
starts to flash. Hold it there until you complete your lane change. The lever
will return by itself when you release it.
As
you signal a turn or a lane change, if the arrows flash at twice the normal
rate, a signal bulb may be burned out and other drivers may
not
see your
turn signal.
If a bulb
is
burned out, replace it to help avoid an accident.
If
the green
arrows don’t
go on
at all when you signal a turn, check for burned-out bulbs
and a blown fuse (see “Fuses” in the Index).
2-40