Filter
Top Products
Maintenance Schedule
I
-
Gasoline Engines Heavy
Duty Emissions
(Continued)
0
Check readfront axle fluid level and add fluid
as
needed. Check
constant velocity joints and axle seals for leaking.""
DATE
SERVICED
BY:
ACTUAL
MILEAGE
60,000
Miles
(100
000
km)
0
0
0
0
0
Change engine oil and filter (or every
3
months, whichever occurs
first).
An
Emission Control Service.
Lubricate the front suspension, king pin bushings, steering linkage,
transmission
shift
linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs.
Ball
joints and king pin
bushings should
not
be lubricated unless their temperature
is
10"
F
(-1
2"
C),
or higher. When weather
is
cold,
let
the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items
at
this mileage
interval (or every 12 months, whichever occurs first).
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.**
Inspect air cleaner filter if you are driving
in
dusty conditions. Replace
filter
if
necessary.
An Emission Control Service.
Replace
fuel
filter. Replace filter sooner
if
it
is clogged.?
Inspect spark plug wires.
An
Emission
Control Service.
7
7-5
1
(Continued)