Filter
Top Products
Maintenance Schedule
I
-
Gasoline Engines With
Light Duty Emissions
33,000
Miles
(55
000
km)
0
Change engine oil and filter (or every
3
months, whichever occurs
first).
An Emission Control Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission
shift
linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should
not
be lubricated unless their temperature is
10"
F
(-12" C), or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each
of
the listed lubrication service items
at
this mileage
interval (or every
6
months, whichever occurs first).
0
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.**
DATE
ACTUAL
MILEAGE
SERVICED
BY:
36,000
Miles
(60
000
km)
0
Change engine
oil
and filter (or every
3
months, whichever occurs
first).
An Emission Control Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is
10"
F
(-12"
C),
or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each
of
the listed lubrication service items at this mileage
interval (or every
6
months, whichever occurs first).
(Continued)
7-20