Filter
Top Products
I
I
Maintenance Schedule
I
-
Diesel Engines
1
(Continued)
0
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.
**
DATE SERVICED
BY:
ACTUAL MILEAGE
r
1
52,500
Miles
(84
000
km)
0
Change engine oil and filter (or every
3
months, whichever occurs
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is
10” F
(-12”
C),
or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of
the
listed lubrication service items at this mileage
interval (or every
12
months, whichever occurs first).
first).
An
Emission
Control Service.
0
Rotate tires. See “Tire Inspection and Rotation”
in
the
Index for proper
rotation pattern and additional information. See “Tires” in the Index.
DATE ACTUAL MILEAGE SERVICED
BY:
~
7-76