Filter
Top Products
Using
a
Transfer Case Mounted Power Take-Off
(Manual Transmission)
1.
Set the parking brake.
2.
Shift the transfer case into NEUTRAL
(N).
3.
Hold the clutch pedal down. If the vehicle will remain in the same
4.
Engage the power take-off.
place, shift the transmission into the highest gear.
If
you
are going to drive
the
vehicle,
shift
the transmission into the gear
you
want.
Then
shift the transfer case into the range
you
want, apply
the regular brakes and release
the
parking brake.
When you release the clutch, the power take-off will start.
5.
Release the clutch (and the regular brakes)
as
you
normally would.
Using
a
Transfer Case Mounted Power Take-Off
(Automatic Transmission)
1.
Set the parking brake.
2.
Shift the transfer case into NEUTRAL
(N).
3.
Shift the transmission into NEUTRAL
(N).
4.
Engage the power take-off.
If you are going to drive the vehicle, shift the transfer case into the
range you want. Then apply the regular brakes
and
release the parking
brake.
5.
Shift the transmission to DRIVE
(3)
to start the power take-off.
6.
Release the regular brakes to drive the vehicle.