Filter
Top Products
To
Resume
a
Set Speed
Suppose
you
set your Cruise Control at
a
desired speed
and
then
you
apply
the brake.
This,
of
course,
shuts
off the Cruise Control. But
you
don’t need
to reset it.
Once you’re going
about
25
mph
(40
km/h) or more, you
can move the Cruise
Control switch from
ON
to
R/A
(Resume/Accelerate)
for about half
a
1
second.
You’ll
go right back up to
your
chosen speed and stay there.
Remember,
if
you
hold the switch at
R/A
longer than half
a
second, the
vehicle will keep going
fater
until
you release
the
switch or apply the
brake. You could be startled and even lose control.
So
unless you want to
go
faster, don’t hold
the
switch at R/A.
To
Increase Speed While Using Cruise Control
There are two ways
to
go
to a higher speed.
Use the accelerator pedal to get to the higher speed, Push the button at
the end of the lever, then release the button and the accelerator pedal.
You’ll
now cruise at the higher speed.
2-45