Filter
Top Products
To
Erase
Speed
Memory
When
you
turn
off
the Cruise Control or
the
ignition, your Cruise Control
set speed memory
is
erased.
Headamps and Vehicle Lighting
Your parWheadlamp
switch
is
on the
drivers side
of
your
instrument panel.
Rotate
the
switch knob clockwise to
the
park lamp symbol
to
turn
on:
Parking Lamps
Sidemarker Lamps
Clearance Lamps
(if
you
have them}
Taillamps
License Plate Lamps
0
Instrument Panel Lights
0
Transfer Case Shift Indicator Light (four-wheel drive vehicles)
Rotate
the
switch knob clockwise again to the master lighting symbol to
turn on all the lamps and lights listed above as well as the headlamps.
Rotate the switch counterclockwise to the off sylnbol to turn
off
your lamps
and lights.
Rotate the thumb wheel
next
to the switch knob up to adjust instrument
panel lamps. Rotate the thumb wheel up to the first notch to return
the
radio
display and gearshift indicator LED display
to
full
intensity when the
headlamps or parklamps are on.
You
can switch
your
headlamps from high
to
low
beam
by
pulling on the
turn signal/high beam lever.
A
circuit breaker protects your headlamps.
If
you have
an
electrical
overload, your headlamps
will
flicker
on
and off. Have your headlamp
wiring checked right away
if
this happens.
2-48