Filter
Top Products
Maintenance Schedule
I
-
Gasoline Engines With
Light Duty Emissions
30,000
Miles
(50 000
km)
0
0
0
0
0
0
0
0
Change engine
oil
and filter (or every
3
months, whichever occurs
first).
An Emission Control Service.
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should
not
be lubricated unless their temperature is
10”
F
(-12”
C),
or higher. When weather is cold, let the ball joints and king
pin bushings warm
up
before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval (or every
6
months, whichever occurs first).
Check redfront axle fluid level and add
fluid
as
needed. Check
constant velocity joints and axle seals for leaking.‘$*
Drain, flush and refill cooling system (or every
24
months, whichever
occurs first). See “Engine Coolant’’
in
the Index for what
to
use.
Inspect hoses. Clean radiator, condenser, pressure cap and neck.
Pressure test the cooling system and pressure cap.
An Emission Control
Service.
For 2-Wheel Drive vehicles only: Clean and repack
the
front wheel
bearings (or
at
each brake relining, whichever occurs first).
Replace spark plugs.
An Emission Control Service.
Replace air cleaner filter. Replace filter more often under dusty
conditions.
An
Em.ission
Control Service.
Rotate tires. See “Tire Inspection and Rotation”
in
the Index
for
proper
rotation pattern and additional information.
DATE
SERVICED
BY:
ACTUAL MILEAGE
L
7-1
9