Filter
Top Products
3 - 12
INSP
ADJ
VALVE CLEARANCE ADJUSTMENT/
TIMING CHAIN TENSIONER ADJUSTMENT
●Once again, measure the valve clearance.
●If the clearance is incorrect, repeat above
steps until the proper clearance is
obtained.
**********************************
Installation
Reverse the “Removal” procedure. Note
the following points.
1.Install:
● Tappet cover 1 (exhaust)
● Tappet cover 2 (intake)
NOTE:
● Install the tappet covers with its ridge fac-
ing upward 3.
● Check the O-ring 4 for damage. If dam-
aged, replace.
T
R
.
.
Tappet cover:
10 Nm (1.0 m • kg, 7.2 ft • lb)
2.Install:
● Fuel tank
● Fuel tank cover
● Seat
Refer to the “FUEL TANK - Installation”
section.
TIMING CHAIN TENSIONER ADJUSTMENT
This model has been equipped the auto-
matic timing chain tensioner 1. No adjust-
ment is necessary.
3