Filter
Top Products
4 - 14
ENG
ENGINE DISASSEMBLY
3.Remove:
● Shift lever assembly 1
● Washer 2
● Return spring 3
● Stopper lever 4
● Washer 5
NOTE:
Push the shift pawl and the stopper lever to
the arrow direction and remove them from
the segment.
4.Remove:
● Segment 1 (shift cam)
Use the Torx
wrench to remove.
NOTE:
When removing the segment, the dowel pin
will fall off. Take care not to lose the pin.
BALANCER DRIVEN GEAR
NOTE:
With the engine mounted, the balancer
driven gear can be maintained by removing
the following parts:
● Starter motor
● Crankcase cover (right)
● Primary and secondary clutches
● Crankcase spacer (right)
● Oil pump assembly
1.Straighten:
● Lock washer tab 1 (driven gear)
2.Remove:
● Nut 2 (driven gear)
NOTE:
Place a folded rag 3 between the teeth of
the driven gear 4 and drive gear 5 to lock
them.
4