Filter
Top Products
4 - 8
ENG
ENGINE DISASSEMBLY
11.Remove:
● Bolts 1 (cylinder)
● Cylinder 2
● Gasket 3 (cylinder)
● Dowel pins 4
● O-ring 5
12.Remove:
● Piston pin clip 1
● Piston pin 2
● Piston 3
NOTE:
● Before removing the piston pin clip, cover
the crankcase with a clean rag so you will
not accidentally drop the clip into the
crankcase.
● Before removing the piston pin, deburr
the clip groove and pin hole area. If the
piston pin groove is deburred and piston
pin is still difficult to remove, use Piston
Pin Puller.
CAUTION:
Do not use a hammer to drive the piston
pin out.
Piston pin puller:
P/N. YU-01304, 90890-01304
STARTER PULLEY CDI MAGNETO
NOTE:
With the engine mounted, the CDI magneto
can be maintained by removing the follow-
ing parts:
● Drive select lever assembly
● Recoil starter assembly
● Starter pulley
4