Filter
Top Products
7 - 5
CHAS
9.Inspect:
● Bearings 1 (brake drum)
Bearings allow play in the brake drum or
the wheel tuns roughly → Replace.
● Oil seal 2
Wear/Damage → Replace.
*********************************
Wheel bearing and oil seal replacement
steps:
●Clean the outside of the brake drum.
●Remove the oil seal 1 use a flat-head
screw driver.
NOTE:
Place a rag 2 on the outer edge to protect
this edge.
●Remove the bearings 3 using a general
bearing puller.
●Install the new bearings and oil seal by
reversing the previous steps.
NOTE:
Use a socket 4 that matches the outside
diameter of the race of the bearing and oil
seal.
CAUTION:
Do not strike the center race 5 or balls 6
of the bearing. Contact should be made
only with the outer race 7.
*********************************
10.Inspect:
● Brake shoe plate 1
Cracks/Damage → Replace.
● Brake shoe plate seal 2
Wear/Damage → Replace.
FRONT WHEELS AND FRONT BRAKE
7