4 - 54
ENG
ENGINE ASSEMBLY AND ADJUSTMENT
SHIFTER AND OIL PUMP
1.Install:
● Segment 1
● Pin 2 (long)
● Pin 3 (short)
NOTE:
Install the pin 2 (long) to the match mark 4
position.
2.Install:
● Segment (shift cam)
NOTE:
Align the hole 1 of the shift cam with the
pin 2 (long) of the segment.
3.Tighten:
● Screw 1 (segment)
T
R
.
.
Screw (segment):
12 Nm (1.2 m • kg, 8.7 ft • lb)
Use LOCTITE
4.Install:
● Torsion spring 1 (to shift shaft)
● Washer 2
● Stopper lever 3 with return spring 4
● Washer 5
5.Install:
● Shift shaft 1
NOTE:
● Before installing the shift shaft, apply the
grease to the oil seal lip (crankcase-left).
● Push the shift pawl 2 and the stopper
lever 3 to the arrow direction and install
them to the segment.
● Be sure the stopper shaft 4 is placed
between the spring hooks.
4