Filter
Top Products
– 27 –
CHAS
FRONT BRAKE
4.Remove:
● Union bolt 1
● Copper washers 2
● Brake hose 3
N
OTE:
Place the open end of the hose into a con-
tainer and pump the oil fluid out carefully.
5.Remove:
● Caliper body 1
● Caliper bracket 2
N
OTE:
Before removing the caliper body from the
bracket, disconnect the dust boot from the
guide shaft on the bracket.
1
2
6.Remove:
● Piston
● Piston seals 1
*********************************************
Removal steps:
●Blow compressed air into the hose joint
opening to force out the caliper piston from
the caliper body.
●Remove the piston seals.
WARNING
Never try to pry out the piston.
*********************************************
MASTER CYLINDER DISASSEMBLY
N
OTE:
Before disassembling the front brake master
cylinder, drain the brake hose, master cylinder,
brake caliper and reservoir tank of their brake
fluid.