4 - 11
ENG
ENGINE DISASSEMBLY
PRIMARY AND SECONDARY CLUTCHES
NOTE:
With the engine mounted, the primary and
secondary clutches can be maintained by
removing the following parts:
● Starter motor
● Crankcase cover (right)
1.Remove:
● Oil filter cover 1
● Oil filter 2
● O-ring 3
● Clutch cover protector 4
● Crankcase cover 5 (right)
● Dowel pins 6
● Gasket 7
2.Remove:
● Spring 1 (clutch release lever)
● Shift guide #1 2
● Ball holder 3
● Shift guide #2 4
3.Straighten:
● Lock washer tab 1
4.Remove:
● Nut 2 (primary clutch)
NOTE:
Hold the clutch carrier 3 by the Rotor
Holder 4 to loosen the nut.
Rotor holder:
P/N. YU-01235, 90890-01235
4