Filter
Top Products
6 - 17
DRIV
MIDDLE GEAR SERVICE
6.Install:
● Bearing 1 (to bearing housing)
● Bearing retainer 2
NOTE:
● Use a Ring nut wrench 3.
Ring nut wrench:
P/N. YM-1391, 90890-01391
7.Tighten:
● Bearing retainer
T
R
.
.
Bearing retainer:
60 Nm (6.0 m • kg, 43 ft • lb)
8.Install:
● Shim(s) 1
● Reverse gear 2
● Reverse gear securing nut 3
NOTE:
● The reverse gear securing nut has left-
hand threads, turn the nut counterclock-
wise to tighten it.
● Use a Ring nut wrench 4.
9.Tighten:
● Reverse gear securing nut
10.Install:
● Shim(s) 1
● Bearing 2
● Bearing retainer 3
NOTE:
● Use a Bearing retainer wrench 4.
Ring nut wrench:
P/N. YM-1391, 90890-01391
T
R
.
.
Reverse gear securing nut:
(LEFT-HAND-THREADS)
60 Nm (6.0 m • kg, 43 ft • lb)
Bearing retainer wrench:
P/N. YM-33289, 90890-04104
6