Filter
Top Products
6 - 20
DRIV
MIDDLE GEAR SERVICE
3.Install:
● Middle drive axle assembly 1
Refer to the “ENGINE ASSEMBLY AND
ADJUSTMENT-CRANK SHAFT, TRANS-
MISSION AND BALANCER SHAFT” sec-
tion in CHAPTER 4.
4.Install:
● Middle drive pinion gear 1
● Nut 2
Use the Rotor Holder 3 to hold the clutch
boss 4.
NOTE:
Put the engine in 1st, and carry out the
operation.
5.Check:
● Middle drive axle, transmission and
shifter operation
Unsmooth operation → Repair.
T
R
.
.
Nut (middle drive pinion gear):
60 Nm (6.0 m • kg, 43 ft • lb)
Rotor holder:
P/N. YU-01235, 90890-01235
6.Lock the thread with drift punch.
WARNING
Always use a new nut.
Refer to the “ENGINE ASSEMBLY AND
ADJUSTMENT – PRIMARY AND SECOND-
ARY CLUTCHES” section in CHAPTER 4.
Middle driven pinion gear
1.Install:
● Middle driven pinion gear assembly 1
Refer to the “ENGINE ASSEMBLY MID-
DLE DRIVEN PINION GEAR” section in
CHAPTER 4.
6