Filter
Top Products
– 6 –
SPEC
1
Tail/brake light
2
Final gear case breather hose
3
Front brake light switch lead
4
Carburetor air vent hose
5
Rear brake breather hose
6
Rear brake cable
7
CDI magneto lead
È
Make sure that the starter motor lead has no
slack.
É
Fasten the starter motor lead and wire harness
to the frame with the plastic band.
Ê
Fasten the starter motor lead and wire harness
to the frame with the plastic clamp.
Ë
Route the starter motor lead, wire harness, and
battery
-
lead through the hole in the rear
fender.
Ì
Fasten the taillight lead and wire harness to the
frame with the plastic clamp.
CABLE ROUTING