Filter
Top Products
7 - 13
CHAS
REAR WHEELS/REAR BRAKE AND REAR AXLE
INSPECTION
1.Inspect:
● Wheel
Refer to the “WHEEL INSPECTION” sec-
tion in CHAPTER 3.
2.Measure:
● Wheel runout
● Tire surfaces
Refer to the “FRONT WHEEL AND FRONT
BRAKE-INSPECTION” section.
3.Inspect:
● Wheel hub 1
Cracks/Damage → Replace.
● Splines 2 (wheel hub)
Wear/Damage → Replace.
4.Inspect:
● Brake linings
5.Measure:
● Brake lining thickness
Refer to the “FRONT WHEEL AND FRONT
BRAKE-INSPECTION” section.
6.Inspect:
● Shoe springs
Refer to the “FRONT WHEEL AND FRONT
BRAKE-INSPECTION” section.
Brake lining thickness:
4.0 mm (0.16 in)
<Wear limit>:
2.0 mm (0.08 in)
7.Measure:
● Brake drum inside diameter a
Out of specification → Replace.
Front brake drum inside diameter:
160 mm (6.30 in)
<Wear limit>:
161 mm (6.34 in)
7