Filter
Top Products
– 5 –
SPEC
1
Cable guide
2
Main switch
3
Fuel tank breather hose
4
Carburetor overflow hose
5
Reverse switch lead
6
Neutral switch lead
7
Starter motor lead
8
Throttle cable
9
Rear brake cable
È
Route the main switch lead and indicator light lead
to the side of the cable guide.
É
Insert the carburetor air vent hose, rear brake
breather hose, and final gear case breather hose
into the air duct after routing them through the fuel
tank grommet.
Ê
Route the carburetor overflow hose between the
engine and upper rear engine mount and then
between the engine and swingarm. Make sure that
the hose is not pinched.
Ë
Fasten the starter motor lead to the frame with the
plastic clamp. Route the starter motor lead over the
throttle cable and rear brake cable.
Ì
Bend the cable guide after routing the cables.
CABLE ROUTING