Filter
Top Products
8 - 20
–+
ELEC
ELECTRIC STARTING SYSTEM
5.Measure:
● Brush length a (each)
Out of specification → Replace the brush.
Brush length:
10 mm (0.39 in)
<Wear limit:>
3.5 mm (0.14 in)
6.Measure:
● Brush spring force
Fatigue/out of specification → Replace as
a set.
Brush spring force:
730 ~ 970 g (7.16 ~ 9.52 N)
7.Inspect:
● Oil seal
● Bushing
● O-rings
Wear/damage → Replace.
STARTER MOTOR ASSEMBLY
1.Install:
● Yoke
● Brackets
NOTE:
Align the match marks a on the yoke with
the match marks b on the brackets.
8