Filter
Top Products
2 - 25
SPEC
CABLE ROUTING
CABLE ROUTING
1 Rear brake lever switch lead
2 Rear brake cable
3 Cable guide
4 Front brake cable
5 Throttle cable
6 Neutral indicator light
7 Reverse indicator light
8 Handlebar switch assembly
lead
9 Fuel tank breather hose
0 Headlight leads
A Equalizer
B Front brake breather hose
Å Do not route the handlebar
switch assembly lead through
the lower bracket cable guide.
ı Route the fuel tank breather
hose through the hole in the
handlebar cover and then to
the right of the handlebar
(below the handlebar, not
over it). Then, pass the hose
through the cable guide.
Ç Fasten the handlebar switch
assembly lead and rear brake
lever switch lead underneath
the handlebar. Position the
plastic band with its tab fac-
ing down.
Î Route the front brake
breather hose through the
plastic clamp on the frame
and then insert the excess
hose into the end of the
frame.
‰ 140 mm (5.51 in)
2