Filter
Top Products
5 - 4
CARB
7.Remove:
● Cover (coasting enricher) 1
● Spring 2
● Diaphragm 3
CARBURETOR
8.Remove:
● Starter plunger 1
INSPECTION
1.Inspect:
● Carburetor body
● Starter jet 1
● Float chamber
Cracks/damage → Replace.
● Fuel passage
Contamination → Clean as indicated.
● Fuel chamber body
Contamination → Clean.
*********************************
Cleaning steps:
●Wash the carburetor in a petroleum based
solvent.
(Do not use any caustic carburetor clean-
ing solution.)
●Blow out all of the passages and jets with
compressed air.
*********************************
2.Inspect:
● Valve seat 1
● Needle valve 2
● O-ring 3
Contamination/wear/damage → Replace
as a set.
NOTE:
Always replace the needle valve and valve
seat as a set.
5