Filter
Top Products
4 - 17
ENG
ENGINE DISASSEMBLY
2.Remove:
● Transmission assembly 1 (main axle and
drive axle)
● Washer 2 (drive axle)
3.Remove:
● Circlip 1
4.Remove:
● Balancer drive gear 2
● Crankshaft 3
(from right crankcase)
● Woodruff key 4
NOTE:
Use a hydraulic press to remove the bal-
ancer drive gear 2 from the crankshaft.
CYLINDER HEAD
1.Straighten:
● Lock washer tabs 1
2.Remove:
● Lock washer 2
● Retainer 3 (camshaft bushing)
3.Remove:
● Camshaft 1
● Camshaft bushing 2
NOTE:
Screw in a suitable length of 10 mm bolt 3
into the thread hole on the camshaft, and
pull out the camshaft.
4