Filter
Top Products
7 - 6
CHAS
INSTALLATION
Reverse the “REMOVAL” procedure.
Note the following points.
1.Lubricate:
● Oil seal lips 1
● Bearings 2
● Camshaft 3
● Pivot pin 4
● O-ring 5
CAUTION:
Install the camshaft and the pivot pin
lightly greased. Wipe off the excess grease.
Lithium-soap base grease
2.Install:
● Pivot pin 1
● Brake camshaft holder 2
T
R
.
.
Pivot pin bolt 3:
10 Nm (1.0 m • kg, 7.2 ft • lb)
Brake camshaft holder bolt 4:
10 Nm (1.0 m • kg, 7.2 ft • lb)
3.Install:
● Brake camshaft 1
● Wear indicator plate 2
● Brake camshaft lever 3
NOTE:
● When installing the wear indicator plate
2 to the brake camshaft 1 align the pro-
jection a on the wear indicator plate with
the slot b on the brake camshaft.
● Align the punched mark c on the brake
camshaft 1 with the punched mark d on
the brake camshaft lever 3.
T
R
.
.
Brake camshaft lever:
9 Nm (0.9 m • kg, 6.5 ft • lb)
FRONT WHEELS AND FRONT BRAKE
7