Filter
Top Products
7 - 29
CHAS
REMOVAL
1.Remove:
● Front carrier
● Front bumper
● Front fender
Refer to the “FENDERS AND FUEL TANK-
FRONT FENDER - Removal” section in
CHAPTER 3.
● Front wheel
● Brake drum
● Brake shoe plate
Refer to “FRONT WHEELS AND FRONT
BRAKE - Removal” section.
2.Remove:
● Cotter pin 1
● Nut 2
● Tie-rod end 3
NOTE:
When removing the rod end from the
knuckle arm, use a general bearing puller.
3.Remove:
● Circlip (shock absorber upper) 1
4.Loosen:
● Flange nut 2
41 mm (1.6 in)
5.Remove:
● Bolts (shock absorber lower) 3
● Flange nut 2
● Shock absorber 4 (front)
6.Remove:
● Cotter pin 5
● Nut 6 (steering knuckle)
● Steering knuckle 7
FRONT SHOCK ABSORBER AND FRONT ARM
7