Filter
Top Products
7 - 41
CHAS
REAR SHOCK ABSORBER AND SWINGARM
3.Tighten:
● Pivot shafts (swingarm)
● Locknut (pivot shaft)
*********************************
Pivot shaft tightening steps:
●Tighten the pivot shaft 1 (left) to specifi-
cation.
●Tighten the pivot shaft 2 (right) until it
contacts the collar 3.
●Tighten the locknut 4 (right) to specifica-
tion.
*********************************
T
R
.
.
Pivot shaft (left):
130 Nm (13.0 m • kg, 94 ft • lb)
T
R
.
.
Pivot shaft (right):
6 Nm (0.6 m • kg, 4.3 ft • lb)
T
R
.
.
Locknut (right):
130 Nm (13.0 m • kg, 94 ft • lb)
4.Inspect:
● Swingarm free play
Refer to the step 8. in the “REMOVAL”
section.
5.Lubricate:
● Bushings (shock absorber-upper and
lower)
6.Install:
● Shock absorber
Lithium-soap base grease
T
R
.
.
Nut (shock absorber - upper):
50 Nm (5.0 m • kg, 36 ft • lb)
7