Filter
Top Products
4 - 75
ENG
ENGINE ASSEMBLY AND ADJUSTMENT
11.Install:
● Spring 1
● Footrest 2 (right)
T
R
.
.
Bolt (footrest):
65 Nm (6.5 m • kg, 47 ft • lb)
12.Install:
● Front fender stay 1
● Sift pedal 2
● Footrest 3 (left)
NOTE:
The center of the shift pedal 2 should be
aligned with the top of the footrest 3.
13.Connect:
● Brake cable 1 (rear)
● Brake pedal rod 2
14.Adjust:
● Rear brake
Refer to the “REAR BRAKE LEVER AND
PEDAL ADJUSTMENT” section in CHAP-
TER 3.
15.Install:
● Starter motor 1
● Bracket 2 (starter motor)
NOTE:
Before installing the starter motor, apply
the grease to the O-ring.
16.Connect:
● Starter motor lead 3
T
R
.
.
Bolt (shift pedal):
10 Nm (1.0 m • kg, 7.2 ft • lb)
Bolt (footrest):
65 Nm (6.5 m • kg, 47 ft • lb)
Bolt (footrest plate):
30 Nm (3.0 m • kg, 22 ft • lb)
T
R
.
.
Bracket (starter motor):
7 Nm (0.7 m • kg, 5.1 ft • lb)
4