Filter
Top Products
– 4 –
SPEC
CABLE ROUTING
1
Rear brake lever switch lead
2
Rear brake cable
3
Cable guide
4
Front brake hose
5
Front brake light switch lead
6
Throttle cable
7
Neutral indicator light
8
Reverse indicator light
9
Fuel tank breather hose
0
Handlebar switch assembly lead
A
Headlight leads
È
Do not route the handlebar
switch assembly lead through
the lower bracket cable guide.
É
Fasten the front brake light
switch lead to the handlebar with
the plastic band.
Ê
Route the fuel tank breather hose
through the hole in the handlebar
cover and then to the right of the
handlebar (below the handlebar,
not over it). Then, pass the hose
through the cable guide.
Ë
Fasten the handlebar switch
assembly lead and rear brake
lever switch lead to the handle-
bar with the plastic bands.
Ì
Fasten the handlebar switch
assembly lead to the handlebar
with the plastic band.
Í
Fasten the handlebar switch
assembly lead and rear brake
lever switch lead underneath the
handlebar. Position the plastic
band with its tab facing down.
CABLE ROUTING